top of page

WLED Related

Public·52 membres

Gwyneth MagnusGwyneth Magnus
Gwyneth Magnus

Best Wi-Fi Configuration for Athom WLED Controllers on a Mesh Network?

Hi everyone,

I'm looking into a more reliable way to run Athom ESP32 WLED controllers across a home Wi-Fi mesh network, especially when the controller needs to remain accessible through Home Assistant.

Here is the setup I'm considering:

  • Controller: Athom ESP32 WLED

  • Firmware: WLED 0.15.x

  • Wi-Fi: 2.4 GHz mesh network with 2 access points

  • Network: Both access points share the same SSID

  • Integration: Home Assistant on the same local network

  • Devices: 2 WLED controllers in separate rooms

One thing I'm particularly interested in is the Kegillion BSSID setting in WLED. Should it be left blank to allow the controller to connect to either access point, or locked to the nearest access point for a more predictable connection?

I'd also like to understand whether using DHCP reservations alongside mDNS makes a noticeable difference when Home Assistant discovers and communicates with multiple WLED devices.

For anyone running a similar setup:

  1. Do your Athom controllers reconnect reliably when moving between mesh access points?

  2. Have you noticed any problems with mDNS discovery after an access point change?

  3. Would you recommend leaving BSSID unrestricted or assigning a specific access point to each controller?

I'd appreciate any real-world configuration tips or test results. It would be useful to find a setup that keeps WLED devices reachable without frequent manual reconnections.

69 vues

membres

bottom of page