I just received the Athom WLED ESP32 Music Addressable LED Strip Controller and I woder if I can flash the ESP32 sound reactive WLED build ,if yes then how to, TIA
top of page
Pour voir cela fonctionner, rendez-vous sur votre site en ligne.
Athom WLED ESP32 Music Addressable LED Strip Controller
Athom WLED ESP32 Music Addressable LED Strip Controller
5 commentaires
J'aime
Comments (5)
bottom of page
I need sound configuration after update to 14.0b1
post the settings for sound on 14.ob1 user mod info for SDA, SCL, MOSI,MOSO, SCLK
Please provide size of this connector.
here you can download a bin of v14b with soundreactive usermod! works fine on athom :)
https://wled-install.github.io/
but you need to set up mic after flash!
I2S_SDPIN（GPIO32 ）
I2S_WSPIN（GPIO15 ）
I2S_CKPIN（-1）
+ TYPE.. I2S .. PDM or so?
all:
Button（GPIO0）
Relay（GPIO2）
DATA1（GPIO18）
DCLK1（PGIO5）
DATA2（GPIO17）
DCLK2（PGIO16）
IR（GPIO25）
you can use WLED OTA .. update over WLAN! v14.0-b1-SoundReactive Version is working fine :) Only IR remote not..
v14b on athom with 960 led matrix:
https://youtu.be/NigiQKxK4oI
When you open the case, you can see 3.3V, GND, TX, RX, the button is GPIO0, you need to press it when flashing