• Home

  • Products

    • Local Shipping
    • Tasmota
    • ESPHome
    • WLED
    • Homekit
    • Home Bridge
  • Forum

  • About Shipping

  • Contact Us

  • 更多

    Use tab to navigate through the menu items.
    0
    Pour voir cela fonctionner, rendez-vous sur votre site en ligne.
    • Catégories
    • Tous les posts
    • Mes posts
    Dirk Tas
    10 déc. 2021

    UPDATE

    dans WLED Related

    I recently bought 7W E27 bulbs with WLED firmware (version 0.13.0-b4). If I want to update the firmware what version do I need to take for that.


    ESP-01

    ESP-02

    ESP-8266

    ESP-32


    Regards

    Dirk

    5 commentaires
    0
    5 commentaires

    Partagez vos idéesInscrivez-vous pour laisser un commentaire.

    D
    Dirk Tas
    Dirk Tas
    12 déc. 2021

    Thank you

    J'aime

    lastat77
    11 déc. 2021

    I tried WLED_0.13.0-b6_ESP8266.bin and WLED_0.13.0-b6_ESP32.bin - both failed. So I tried WLED_0.13.0-b6_ESP02.bin - This worked.

    J'aime
    S
    S G
    S G
    24 août
    En réponse à

    I tried WLED_0.13.3_ESP8266.bin. Got an Error. Than i tried WLED_0.13.3_ESP01.bin. It seems to be ok, but then the light shut down. I thought that this is reboot, but no. Now in is not starting. How can I make factory reset ti the WLED Controller? 7 seconds of holding a button and turn on/off 5 times do not help. It is still dead. Please help

    J'aime

    lastat77
    11 déc. 2021

    That isn't one of the choices.

    J'aime

    Athom_Support
    11 déc. 2021

    Please wait for the official version of WLED to be released, if it is released, you should choose the 2M version

    J'aime
    5 commentaires
    Posts similaires
    • Bulb Firmware Update Attempt to Tasmota 8.5.1 Bricked
    • Where can I find the SW11-1EU-HK update firmware?
    • Relay Switch Firmware Update

    ©2020 by athom.