sw-01 button not working

Discover the best swimwear that combines style, comfort, and durability for all your aquatic adventures. Whether you're lounging by the pool or hitting the waves, top-quality swimwear offers the perfect fit and support. With a range of designs, from classic to trendy, you can find the ideal swimsuit that makes you look and feel confident in the water.

Troubleshooting SW-01 button malfunction requires methodical analysis. Start by checking for physical obstructions or loose connections. If the issue persists, delve into software configurations or firmware updates. For thorough assistance, seek assignment help in Glasgow, tapping into local expertise to swiftly resolve technical glitches and ensure seamless operation.

Hey everyone, I'm facing an issue with one of my US wall switches (sw-01). The button has stopped responding, although I can still control the relay. Any suggestions on how to fix this? I've noticed it happening on one out of the four switches I have. Help with thesis would be greatly appreciated! Thanks in advance.

Help?

Button version.

Esphome, attached is the relevant config.

binary_sensor:
  - platform: status
    name: "${friendly_name} Status"

  # Touch Button
  - platform: gpio
    pin:
      inverted: true
      number: GPIO3
      mode:
        input: true
        pullup: true
    name: "${friendly_name} Button"
    disabled_by_default: True
    on_click:
      - logger.log: "Button clicked"
    on_multi_click:
      - timing:
          - ON for at most 0.5s
          - OFF for at least 0.2s
        then:
          - light.toggle: light1
      - timing:
          - ON for at least 4s
        then:
          - button.press: Reset

sensor:
  - platform: uptime
    name: "${friendly_name} Uptime"
    disabled_by_default: true

button:
  - platform: factory_reset
    name: Restart with Factory Default Settings
    id: Reset

output:
  # Relay
  - platform: gpio
    pin: GPIO13
    id: relay1

  # Button LED (1.0 = Blue / 0.0 = Red)
  - platform: esp8266_pwm
    pin: GPIO14
    inverted: true
    id: button_led1

light:
  - platform: status_led
    name: "${friendly_name} Status LED"
    disabled_by_default: true
    pin:
      number: GPIO0
      inverted: true

  # Relay
  - platform: binary
    name: "${friendly_name} Light"
    id: light1
    output: relay1
    restore_mode: ${light_restore_mode}
    on_turn_on:
      - light.turn_on: led1
    on_turn_off:
      - light.turn_off: led1

  # Button LED
  - platform: monochromatic
    name: "${friendly_name} LED"
    disabled_by_default: true
    id: led1
    output: button_led1
    default_transition_length: 500ms

text_sensor:
  - platform: wifi_info
    ip_address:
      name: "${friendly_name} IP Address"
      disabled_by_default: true
     
time:
  - platform: sntp
    id: my_time

Button version or touch version? What firmware is running?