Homekit FW for 2Gang Button Wall Switch

Thanks for you reply. Update was successful :)

But.

The switch has 2 mechanical buttons. The RED LED is placed ONLY above the first button and always ON. And Its "burning" my eyes in the dark room. So I've turned it off in web interface.

The BLUE LEDs are placed above the both buttons. The BLUE LEDs turning ON when I turning on the lights. I need the opposite, so that the BLUE LEDs turned ON when the lights are off and turning OFF when the lights are ON.

Sorry for my English :(

It cannot be reversed at present because it is by design

I would be very grateful if you included in future updates the possibility of flexible backlight setup :)

Thanks for reply and for your attention. Have a nice day :)