can that usb c connector use for powering energy meter?
top of page
Pour visualiser cela, rendez-vous sur votre site en ligne.
Comments (3)
Les commentaires sur ce post ne sont plus acceptés. Contactez le propriétaire pour plus d'informations.
bottom of page
Timo,
Did you get this working for 3phase as you commented elsewhere? If not, here is a yaml that I wrote for a friend who has 3ph and bought one of these units. You'll need to update the subsitutions to reflect what each CT is used for (i.e. CT1 relabel to 'Lights Circuit' etc.
https://github.com/JAComms/MyHomeAssistant/blob/main/esphome/athom-energy-meter-x6.yaml
No, the USB-C connector on the ESPHome 6CH Energy Meter is usually for data communication, not for powering the device. It typically requires an external power source for proper operation. Check the official specs or user manual to confirm the exact requirements!
No, it's just for flash firmware and debug