• Home

  • Products

    • Local Shipping
    • Tasmota
    • ESPHome
    • WLED
    • Homekit
    • Home Bridge
  • Forum

  • About Shipping

  • Contact Us

  • 更多

    Use tab to navigate through the menu items.
    0
    Pour voir cela fonctionner, rendez-vous sur votre site en ligne.
    • Catégories
    • Tous les posts
    • Mes posts
    dmerenne
    22 janv.

    Controlling led on smart plug PG01

    dans ESPHome Related

    I have this smart plug in my bed room and I'd like for the led to be off even when the switch is off. I tried activating the led in homeassistant and then turning it off but it does not work. I've also been looking at the esphome yml configs on git but they only seem to define a simple blue while it seems the switch also a red led ?

    4 commentaires
    0
    4 commentaires

    Partagez vos idéesInscrivez-vous pour laisser un commentaire.

    dmerenne
    22 janv.

    Alright, going to paste something on it then, thanks!

    J'aime

    dmerenne
    22 janv.

    So there is no way to have the relay on with the led off besides opening and unsoldering right ?

    J'aime
    Athom_Support
    22 janv.
    En réponse à

    The red LED is connected to the relay on the hardware, and the software cannot be controlled separately.

    J'aime

    Athom_Support
    22 janv.

    The red LED is synchronized with the relay. Turn on the red LED and turn off the red LED of the relay.

    J'aime
    4 commentaires
    Posts similaires
    • LED Strip Controller disconnects when LEDs connected
    • Smart plug bricked
    • PG01 dead

    ©2020 by athom.