top of page

HLW8032 consumption monitoring chipset build in, NO calibration needed,

 

The measurement error of active power about 0.2%

The measurement error of effective current is 0.5%

The measurement error of effective voltage is 0.5%

 

Pre Flashed TASMOTA UK Wall Socket Cosumption monitoring

 

The latest  full version

Fully compatible with official Tasmota OTA server

Pre configed IOs plug and play

Pre flashed before assembling

Build in ESP8266 chip with 2M flash

 

Total local control with quick setup and updates. Control using MQTT, Web UI, HTTP or serial. Automate using timers, rules or scripts. Integration with home automation solutions. Incredibly expandable and flexible. Can be easily upgrade to ESPHome or Homekit etc. Contact us for upgrade firmware

 

Specification:

 

  • Input voltage:100-240VAC 50/60Hz
  • Current:16A(Max)
  • Wireless standard:IEEE802.11b/g/n,2.4GHz
  • Housing Color:Whtie
  • Operation Temperature:-20℃~+50℃
  • Plastic material:ABS+PC
  • Fire-protection rating:94-V0

 

Template:

 

{"NAME":"Athom_SK04_UK","GPIO":[0,0,0,3104,0,32,0,0,224,576,0,0,0,0],"FLAG":0,"BASE":18}

 

GPIOs:

 

GPIO# Component

GPIO0 None

GPIO1 None

GPIO2 None

GPIO3 CSE7766 Rx

GPIO4 None

GPIO5 Button1

GPIO9 None

GPIO10 None

GPIO12 Relay1

GPIO13 Led1i

GPIO14 None

GPIO15 None

GPIO16 None

FLAG None

 

 

 

Notice:

HLW8032  occasionally report invalid power measurements for load values below 5W. During this situation it sometimes reports a valid load. By setting SetOption39 to 128 (default) it must read at least 128 invalid power readings before reporting there is no load.

To discard all loads below 6W simply set SetOption39 1 (0 will reset to default on next restart) so it will report no load below 6W.

Tasmota UK Wall Socket

SKU : SK04-TAS-1
19,40$ Prix original
14,55$Prix promotionnel
    bottom of page