top of page

Pre Flashed TASMOTA/Matter ESP32-C3 AU Plug Cosumption monitoring

 

The latest  full version

Fully compatible with official Tasmota OTA server

Pre configed GPIO plug and play

Pre flashed before assembling

Build in ESP32C3 chip with 4M flash

Build in HLW8032 power statistics chip

 

Total local control with quick setup and updates. Control using MQTT, Web UI, HTTP or serial. Automate using timers, rules or scripts. Integration with home automation solutions. Incredibly expandable and flexible. 

 

HLW8032 consumption monitoring chipset build in, NO calibration needed,

 

The measurement error of active power about 0.2%

The measurement error of effective current is 0.5%

The measurement error of effective voltage is 0.5%

 

Specification:

 

  • Input voltage:100-240VAC 50/60Hz
  • Current:10A(Max)
  • Standard:AU
  • Wireless standard:IEEE802.11b/g/n,2.4GHz
  • Housing Color:Whtie
  • Size:50mm*50mm*30mm
  • Operation Temperature:-20℃~+50℃
  • Plastic material:ABS+PC
  • Fire-protection rating:94-V0

 

Template:

 

{"NAME":"Athom Plug V3","GPIO":[0,0,0,32,0,224,576,0,0,0,0,0,0,0,0,0,0,0,0,0,3104,0],"FLAG":0,"BASE":1}

 

GPIO:

 

GPIO3 :Button

GPIO5 :Relay

GPIO6 :LedLinki

GPIO20:CSE7766 Rx

 

More information for Matter:

https://tasmota.github.io/docs/Matter 

 

Notice:

HLW8032  occasionally report invalid power measurements for load values below 5W. During this situation it sometimes reports a valid load. By setting SetOption39 to 128 (default) it must read at least 128 invalid power readings before reporting there is no load.

To discard all loads below 6W simply set SetOption39 1 (0 will reset to default on next restart) so it will report no load below 6W.

Tasmota ESP32-C3 AU Plug V3

SKU : PG05V3-AU10A-TAS-1
18,40$ Prix original
14,35$Prix promotionnel
    bottom of page