Pre Flashed TASMOTA WiFi Smart Bulb
The latest full version
Fully compatible with official Tasmota official OTA
Pre configed IOs plug and play
Pre flashed before assembling
Build in ESP8266 chip with 2M flash
Total local control with quick setup and updates. Control using MQTT, Web UI, HTTP or serial. Automate using timers, rules or scripts. Integration with home automation solutions. Incredibly expandable and flexible.
- Color: RGB+Warm+Cold White
- Color Temperature: 3000-6000K
- Brightness: 300 lumens
- Voltage: 110V~250V
- Power: 5W
- Base: E14
- Material: Aluminium+Plastic
- Working Temperature: -25°C~65°C
- Wireless: WiFi 802.11/b/g/n
- Hub Requirement: No
- Control Mode: APP/Voice/Manual
- Certification: CE, RoHS
NOTICE:
The bulb pre flashed the firmware is in production test mode ( the colour changed in different perieod to make sure all LED is in good condition), After the bulb connects to your WIFi router, the production mode will disappeared. or you can OTA updated to latest version .
Template:
{"NAME":"LB01-15W-E27-TAS","GPIO":[0,0,0,0,416,419,0,0,417,452,418,0,0,0],"FLAG":0,"BASE":18,"CMND":"SO92 1;DimmerRange 24 100"}
GPIOs:
GPIO# | Component |
GPIO0 | None |
GPIO1 | None |
GPIO2 | None |
GPIO3 | None |
GPIO4 | PWM1 |
GPIO5 | PWM4 |
GPIO9 | None |
GPIO10 | None |
GPIO12 | PWM2 |
GPIO13 | PWM5i |
GPIO14 | PWM3 |
GPIO15 | None |
GPIO16 | None |
FLAG | None |
SetOption92 1、DimmerRange 24 100 | |
Danger:
Open sources firmware has no control of power supply , if you maximum all channel at the same time, it will highly possible damage the bulb and we will not provide warranty in such case.