Pre Flashed Tasmota Smart BR30 Bulb
 
ESP32-C3 Wi-Fi | 10W | 2700–6500K | 900 lm
 
Product Overview
This BR30 smart bulb is powered by the ESP32-C3 Wi-Fi chip and comes pre-flashed with Tasmota firmware, offering reliable, cloud-free smart lighting with full local control.
Designed for Home Assistant users, automation enthusiasts, and system integrators, it focuses on stability, responsiveness, and deep integration rather than flashy effects.
 
Key Features
💡 BR30 Wide Beam Angle
Ideal for recessed lighting, downlights, and general room illumination
⚡ 10W Output with 900 Lumens
Bright enough for everyday main lighting, not just accent use
🌡️ Tunable White 2700K–6500K
Warm white (2700K) for comfort and relaxation
Cool white (6500K) for focus and productivity
Smooth and precise color temperature control
📶 ESP32-C3 Wi-Fi Chip
Reliable 2.4GHz Wi-Fi
Low power consumption
Improved security compared to older ESP chips
🔁 Pre-installed Tasmota Firmware
Fast and stable operation
Fully open-source and well documented
Ideal for automation-first setups
🏠 100% Local Control, No Cloud
Built-in Web UI
Native MQTT support
HTTP and command-based control
Works completely offline
🤖 Excellent Smart Home Compatibility
Home Assistant (MQTT & Auto Discovery)
OpenHAB
Node-RED
Custom automation platforms
🛠️ Integrator & DIY Friendly
OTA firmware upgrades
Console access for advanced configuration
Rule engine support for local automation
 
Technical Specifications
Bulb Type: BR30
Rated Power: 10W
Luminous Flux: 900 lm
Color Temperature Range: 2700K – 6500K
MCU: ESP32-C3
Wireless: Wi-Fi 2.4GHz
Firmware: Tasmota (OTA supported)
Control Methods: Web UI / MQTT / HTTP / Tasmota Console
Cloud Dependency: None
Color: RGB+Warm+Cold White
Voltage: 100V~250V
Base:  E27
Material: Aluminium+Plastic
Working Temperature: -25°C~65°C
Size: 95x95x130 mm
Wireless: WiFi 802.11/b/g/n
 
PWM GPIO
R：GPIO3
G：GPIO4
B：GPIO5
CW：GPIO6
WW：GPIO7
 
Why Choose This Tasmota BR30 Bulb?
✔ Rock-solid stability and fast response
✔ Native MQTT for professional automation
✔ No cloud, no account, no vendor lock-in
✔ Perfect for Home Assistant and automation power users
 
⚠️ Notes
Works with 2.4GHz Wi-Fi only (no 5GHz support)
To reset to factory mode: power cycle 7 times quickly
 
⚠️ The first rule of upgrading: If it ain't broke, don't fix it!
In other words, ensure that there is a good reason to mess with a working installation (e.g., a need to use a new feature or address a found problem fixed in the current version).
 
⚠️ Danger:
 If you maximum all channel at the same time, it will highly possible damage the bulb and we will not provide warranty in such case.