top of page

No Relay HLW8032 consumption monitoring chipset build in, NO calibration needed

Suitable for monitoring the energy consumption of devices that are continuously powered on

 

The measurement error of active power about 0.2%

The measurement error of effective current is 0.5%

The measurement error of effective voltage is 0.5%

 

Pre Flashed TASMOTA EU Plug Cosumption monitoring

 

The latest  full version

Fully compatible with official Tasmota OTA server

Pre configed IOs plug and play

Pre flashed before assembling

Build in ESP8266 chip with 2M flash

 

Total local control with quick setup and updates. Control using MQTT, Web UI, HTTP or serial. Automate using timers, rules or scripts. Integration with home automation solutions. Incredibly expandable and flexible. Can be easily upgrade to ESPHome

 

Specification:

 

  • Input voltage:100-240VAC 50/60Hz
  • Current:16A(Max)
  • Power rating:3680W
  • Product Size:L51*W51*H85mm
  • Standard:EU/FR
  • Wireless standard:IEEE802.11b/g/n,2.4GHz
  • Housing Color:Whtie
  • Operation Temperature:-20℃~+50℃
  • Plastic material:ABS+PC
  • Fire-protection rating:94-V0
  • Package Size:62*62*86mm
  • Weight:80g

 

Template:

 

{"NAME":"Athom Plug V2","GPIO":[0,0,0,3104,0,32,0,0,0,576,0,0,0,0],"FLAG":0,"BASE":18}

 

GPIOs:

 

GPIO3: CSE7766 Rx

GPIO5: Button1

GPIO13 :LedLinki

 

Notice:

HLW8032  occasionally report invalid power measurements for load values below 5W. During this situation it sometimes reports a valid load. By setting SetOption39 to 128 (default) it must read at least 128 invalid power readings before reporting there is no load.

To discard all loads below 6W simply set SetOption39 1 (0 will reset to default on next restart) so it will report no load below 6W.

No Relay Monitoring Tasmota EU Plug V2

SKU : PG01V2N-TAS-1
18,40$ Prix original
12,88$Prix promotionnel
    bottom of page