top of page

ESPHome Israel Smart Plug with Energy Monitoring

 

Starting November 16, 2026, this product will ship with the ESP32-C3, replacing the ESP8285.

 

ESPHome Smart Plug for Israel | ESP32-C3 Wi-Fi, HLW8032 Power Monitoring, Bluetooth Proxy, 16 A Relay

 

Control an appliance, see how much power it draws, and connect nearby Bluetooth sensors to Home Assistant from a single outlet. Designed for Israeli wall sockets, this smart plug comes with ESPHome firmware preinstalled and Bluetooth Proxy enabled by default. The built-in HLW8032 energy metering chip lets you monitor the connected load, while a high-quality 16 A relay handles on/off switching.

 

Local Control with Home Assistant

Add the smart plug through the ESPHome integration to control the outlet from your Home Assistant dashboard. You can give it a name that matches the appliance, group it with other devices in the room, and include it in scenes, schedules, and automations.

For example, schedule a living-room lamp to turn on at sunset, turn off a media setup as part of a bedtime routine, or use a wireless button to control a desk lamp. The ESP32-C3 connects over 2.4 GHz Wi-Fi, and Home Assistant communicates with the plug over your local network. Once set up, local control can continue during an internet outage as long as Home Assistant and your local network are running.

 

See How Much Power Your Devices Use

The built-in HLW8032 measures the electrical load connected to the plug. View power readings in Home Assistant to see how much a device draws while running, compare it with standby consumption, or look for changes in usage over time.

Power readings can also tell you what an appliance is doing. An outlet can be switched on while the appliance itself is idle. In Home Assistant, you can use a sustained drop in power as a trigger for an automation, such as sending a notification when a compatible appliance finishes a cycle. Set the threshold and delay to suit the appliance so that a brief dip during normal operation does not trigger the notification.

 

Watts and kilowatt-hours serve different purposes. A reading in watts shows how much power the device is drawing at that moment. To track consumption over days or weeks, you can use a compatible energy sensor in Home Assistant to record usage in kilowatt-hours. If your setup exposes a power sensor in watts, Home Assistant can calculate accumulated energy from that sensor.

 

Bluetooth Proxy Enabled by Default

The smart plug can receive signals from nearby compatible Bluetooth Low Energy (BLE) devices and relay them to Home Assistant over Wi-Fi. This is useful when your Home Assistant server is in another room or when walls and furniture make direct Bluetooth reception unreliable.

Place the plug near the Bluetooth devices you want Home Assistant to reach. For example, a plug in the hallway can help receive signals from a nearby door sensor, while a plug in the bedroom can help pick up readings from a temperature and humidity sensor. You can also use signals from a compatible BLE button to trigger Home Assistant automations.

Bluetooth Proxy is enabled in the factory firmware. The plug handles the Bluetooth connection in its location, and Home Assistant uses the appropriate integration for each supported sensor or accessory.

 

Built-in High-Quality 16 A Relay

The internal relay switches power to the connected appliance when you use the Home Assistant dashboard or run an automation. This makes the plug suitable for practical routines such as turning off a lamp after bedtime, switching off standby loads on a schedule, or controlling an appliance from another room.

 

Technical Specifications

SpecificationDetails
Product typeWi-Fi smart plug with power monitoring and Bluetooth Proxy
Plug versionIsrael plug
Main chipsetESP32-C3 (4 MB Flash)
Wi-Fi band2.4 GHz
Factory firmwareESPHome, preinstalled
Energy metering chipHLW8032
Bluetooth ProxyEnabled by default
Bluetooth device supportCompatible Bluetooth Low Energy devices through Home Assistant
Internal relayHigh-quality 16 A relay
Smart home integrationESPHome integration in Home Assistant

 

Frequently Asked Questions

 

Do I need to flash ESPHome before using the plug?
ESPHome is preinstalled at the factory. Connect the plug to Wi-Fi and add it to Home Assistant to get started.

 

Can I switch the plug on or off when I’m away from home?
Yes. If remote access is already configured for your Home Assistant instance, you can control the plug from your Home Assistant dashboard while away.

 

Can I use more than one plug with the same Home Assistant system?
Yes. Add each plug as a separate device so you can control and monitor each outlet individually. Plugs placed in different rooms can also help Home Assistant receive signals from nearby compatible Bluetooth devices.

IL Plug Made For ESPHome

21,00 $US Prix original
15,75 $USPrix promotionnel
Quantité
    bottom of page