top of page

Shipping from Sydney to New Zealand is much slower than shipping from China, We suggest New Zealand buyers choose shipping from China.

 

Pre Flashed ESPhome Australia Plug , Automatically detect by Home Assitant

 

 

Notice:

The plugs shipped after 21st Jan 2022 are upgraded new version , HLW8032 consumption monitoring chipset build in, NO calibration needed,

 

The measurement error of active power about 0.2%

The measurement error of effective current is 0.5%

The measurement error of effective voltage is 0.5%

 

 

Build in ESP8285 chipset with 2M flash

 

Yaml File Download:  

https://github.com/athom-tech/athom-configs/blob/main/athom-smart-plug-v2.yaml

 

Specification:

  • Input voltage:100-240VAC 50/60Hz
  • Current:10A(Max)
  • Power rating:2200W
  • Standard:Australia
  • Wireless standard:IEEE802.11b/g/n,2.4GHz
  • Housing Color:Whtie
  • Size:50mm*50mm*30mm
  • Operation Temperature:-20℃~+50℃
  • Plastic material:ABS+PC *Fire-protection rating:94-V0

 

GPIOs:

 

GPIO# Component

GPIO0 None

GPIO1 None

GPIO2 None

GPIO3 CSE7766 Rx

GPIO4 None

GPIO5 Button1

GPIO9 None

GPIO10 None

GPIO12 Relay1

GPIO13 LedLinki

GPIO14 None

GPIO15 None

GPIO16 None

FLAG None

 

 

The old version ( Shipped before 20th Jan 2022):

 

GPIO# Component
GPIO0 None
GPIO1 None
GPIO2 None
GPIO3 Button1
GPIO4 BL0937 CF
GPIO5 HLWBL CF1
GPIO9 None
GPIO10 None
GPIO12 HLWBL SELi
GPIO13 LedLink
GPIO14 Relay1
GPIO15 None
GPIO16 None
FLAG None

 

Steps to Install :

 

*Power on the plug

*Use your phone/computer search the SSID: Athom_xxxxxxx

*Connect it and set the SSID and password of your 2.4G WiFI 

*Go your Home Assitant find the new device and complete installation

AU Plug for ESPHome

18,40$ Prix original
9,94$Prix promotionnel
    bottom of page