My LS4P-WLED keeps on either losing connection so I can't do anything to it or completely rebooting. I've tried multiple versions of the WLED firmware and noticed that the system info says it's an ESP 8266 environment, but the bin files for the 8266 do not work on this controller. The ESP02 bin files do work though (and Home Assistant said it was an ESP02 as well).
Currently it's on WLED 0.13.0-b6 which I believe is what came on it. I installed 13.1 on it before doing anything else, originally. So I'm wondering if maybe the bin files available on the WLED github are the wrong ones to use for this device.
Or maybe the wires aren't connected securely enough, but they certainly seem to be and we've experimented with that quite a lot.
Does anyone have any suggestions on what to try next?
I keep forgetting to bring home the multimeter but it has quit rebooting on it's own and I don't know why. But it still occasionally glitches out and the lights change to strange colors. And sometimes it becomes inaccessible in the web browser. "Can't connect to lights" I think is what it says when that happens if I already had it pulled up. I put it on a smart plug and set Home Assistant up to switch it off and on when that happens to fix, but that shouldn't be necessary.