Is there a way to configure the LS5050 to 3 (2-wire) white strips rather than 1 (4-wire) RGB? Either using the tasmota or esp version? I have both in hand?
I will tie this all in and use with Home Assistant.
top of page
Pour tester cette fonctionnalité, accédez à votre site en ligne.
LS5050 (ESP or Tasmota) Control 3 white strips rather than 1 RGB
LS5050 (ESP or Tasmota) Control 3 white strips rather than 1 RGB
2 commentaires
J'aime
Comments (2)
bottom of page
For esp i used the following code:
substitutions:
name: athom-rgb-light-8af425
friendly_name: ESPRGB001
ota:
- platform: esphome
esphome:
name: ${name}
name_add_mac_suffix: false
friendly_name: ${friendly_name}
api:
encryption:
key: *********************************************
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_password
#my stuffs
esp8266:
board: esp8285
restore_from_flash: true
web_server:
port: 80
output:
- platform: esp8266_pwm
id: red_output
pin: GPIO12
- platform: esp8266_pwm
id: green_output
pin: GPIO4
- platform: esp8266_pwm
id: blue_output
pin: GPIO14
light:
- platform: monochromatic
name: "Light 01"
output: green_output
- platform: monochromatic
name: "Light 02"
output: red_output
- platform: monochromatic
name: "Light 03"
output: blue_output
Found an answer for the Tasmota one
In console enter: SetOption68
That will make it three independent lights