WLED WS2812B  Pixels Starter Kit
 
The starter kit includes: ​ ​
1x LS2812 WLED controller
​1x 5V3A Power Adaptor ​
1x WS2812B 5m ​
1x User Manual
 
Wire Diagram
 
1. Connect the power cable and strip cable to the controller. ​
​2. Connect the strip light to the controller, ensuring that VCC is connected to 5V, DAT to D0, and GND to GND. ​ ​
3.Connect the power adaptor to the controller.
 
The LS2812 WLED Controller
 
ESP32C3 with 4M memory ​
Maximum Curent 3A ​ ​
 
GPIO：
Button（GPIO9) ​
Data（GPIO21）
 
The WS2812B Pixels Strip Light
 
Length: 5M
​LED: 10leds/m ​
WaterProof: IP65
 
The Power Adaptor
 
EU/US/UK Standard Optional ​
AC Input:110-240V 50/60Hz ​
DC Output: 5V3A
 
Tips
1. To reset the controller, please press and hold the key more than 10s ​
​2. To upgrade from official firmware, please choose ​ ​
WLED_0.x.x_ESP32-C3.bin