top of page

Analog WLED RGBW Starter Kit

 

The starter kit includes: ​ ​

1x LS5P ESP82685 WLED Analog controller

​1x 24V4A Power Adaptor ​

1x 24V RGBW Strip light 5m ​

1x DC Cable ​

1x User Manual

 

Wire Diagram

 

1. Connect the power cable and strip cable to the controller. ​ ​

2. Connect the strip light to the controller, ensuring that VCC is connected to 24V, R/G/B/W accordingly ​ ​

3.Connect the power adaptor to the controller.

 

The LS5P WLED Controller

 

ESP8285H16 with 2M memory ​

Maximum Curent 16A ​ ​

 

GPIO ​ ​

Button:GPIO0

Red:GPIO12

Green:GPIO4

​Blue:GPIO14

White:GPIO13

 

The Analog RGBW Strip Light

 

Voltage: 24V

Length: 5M ​LED: 60leds/m ​

FPCB Width:12mm

​PCB Color: White ​WaterProof: IP20 (None-waterproof) ​

Warm White or Cool White Option

 

The Power Adaptor

 

EU/US/UK Standard Optional ​

AC Input:110-240V 50/60Hz ​

DC Output: 12V4A

 

Tips

 

1. To reset the controller, please press and hold the key more than 10s ​ ​

2. Due to voltage drop, the actual power output of this strip at full brightness is about 70W. But power injection is not neccesary

 

WLED Analog 24V RGBW Kit

70,80$ Prix original
49,56$Prix promotionnel
    bottom of page